skip to Main Content
Pin-Gauge-Height-Requirements Pin-Gauge-Height-Requirements-Planner-Guage

Formula (*Cannery or Closing Seamer)

Calculate by taking the; Actual Can Height Dimension

minus Seaming Chuck Flange Width
minus .020 of an inch (,5mm) Can Height Lost in Seaming Process.
minus .025 of an inch ( 63mm) Spring Deflection
equals Pin Gauge

Height measured between the bottom of the Seaming Chuck down the the Lower Lifter (Lower Chuck) Plate.

This dimension is adjusted at the end of the 1st Operation Seam Cycle.

*Can Shop applications must subtract the Lower Chuck Plate groove depth from the final dimension.

Back To Top